Lenovo 4376XC2 Laptop User Manual


 
Chapter 5. Troubleshooting
37
Other problems
Your computer does not
respond.
To turn off your computer, press and hold the power
button for 4 seconds or more. If the computer still
does not respond, remove the AC adapter.
Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep
timer when you are working on the network.
The computer does not
start from a device you
want.
See the Boot menu of the BIOS setup utility. Make
sure that the Boot Priority Order in the BIOS setup
utility is set so that the computer starts from the
device you want.
Also make sure that the device from which the
computer starts is enabled. In the Boot menu in the
BIOS setup utility, make sure that the device is
included in the Boot Priority Order list.
Press Fn + F12 (when HotKey Switch is set to
Hotkey Mode) or F12 (when HotKey Switch is set to
Legacy Mode) when the Lenovo logo appears on the
screen while the computer is starting up to select the
device you want the computer starts from.
The connected external
device does not work.
Do not connect or disconnect any external device
cables other than USB while the computer power is
on; otherwise, you might damage your computer.
When using a high power consumption external
devices such as an external USB optical disk drive,
use external device power adapter. Otherwise, the
device may not be recognized, or system shut down
may result.