Filter
Top Products
4. Pull on the handle of the hard disk drive bracket as shown and then lift the hard disk drive bracket
up from the optical drive bay.
Figure 70. Removing the hard disk drive
5. Disconnect the signal cable and the power cable from the hard disk drive to completely remove the hard
disk drive from the chassis.
6. Flex the retaining clips as shown to remove the hard disk drive from the bracket.
Figure 71. Removing the hard disk drive from the bracket
Chapter 9. Replacing FRUs (Machine Types: 4466, 4471, 4474, 4477, 4480, 4485, 4496, 4498, 4503, 4512, 4514,
4518, 4554, 7005, 7023, 7033, 7035, 7072, 7079, and 7177.) 135