Filter
Top Products
11. Install the screw to secure the cover presence switch to the chassis.
Figure 50. Reinstalling the cover presence switch
12. To reinstall the front bezel, align the three tabs on the front bezel with the corresponding holes in the
chassis and pivot the front bezel inwards until it snaps into position.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 68.
Replacing the keyboard or mouse
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the keyboard or mouse.
To replace the keyboard or mouse, do the following:
1. Remove any media from the drives. Then, turn off all attached devices and the computer.
Chapter 5. Installing or replacing hardware 67