Filter
Top Products
2. Use Windows Explorer or My Computer to display the directory structure of your hard disk drive.
3. Go to the C:\SWTOOLS directory.
4. Open the DRIVERS folder. Within the DRIVERS folder, there are several subfolders named for various
devices installed in your computer, such as AUDIO or VIDEO.
5. Open the appropriate device subfolder.
6. Do one of the following:
• In the device subfolder, look for a SETUP.exe le. Double-click the le and follow the instructions on
the screen to complete the installation.
• In the device subfolder, look for a README.txt le or a le with the .txt extension. This le might be
named after the operating system, such as WIN98.txt. The TXT le contains information about how to
install the device driver. Follow the instructions to complete the installation.
• If the device subfolder contains a le with the .inf extension and you want to install the device driver
using the INF le, refer to your Windows Help and Support information system for detailed information
about how to install the device driver.
Solving recovery problems
If you are unable to access the Rescue and Recovery workspace or the Windows environment, do one
of the following:
• Use a rescue medium to start the Rescue and Recovery workspace. See “Creating and using a rescue
medium” on page 46
.
• Use recovery media if all other methods of recovery have failed and you need to restore the hard disk
drive to the factory default settings. See “Creating and using recovery media” on page 43
.
Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from a
rescue medium, a recovery repair diskette, or recovery media, you might not have the rescue device (an
internal hard disk drive, a disc, a USB hard disk drive, or other external devices) set as the rst boot device in
the startup device sequence. You must rst make sure that your rescue device is set as the rst boot device
in the startup device sequence in the Setup Utility program. See “Selecting a startup device” on page 51
for
detailed information about temporarily or permanently changing the startup device sequence. For more
information about the Setup Utility program, see Chapter 4 “Using the Setup Utility program” on page 49.
It is important to create a rescue medium, a recovery repair diskette, and a set of recovery media as early as
possible and store them in a safe place for future use.
48 ThinkCentre User Guide