Lenovo 59366616 Laptop User Manual


 
1. Close other applications, then restart the backup process.
2. Check if the destination medium is damaged, try to select another le path and then try again.
Question: When do I need to restore the computer to the factory default settings?
Solution: You can restore the computer to the factory default settings when it fails or when you need
to reinstall the operating system. This will restore your computer back to the initial state when you rst
started it up after receiving it from the store. Ensure that you have backed up your critical data before
doing this to avoid data loss.
Tips on using your computer
This topic provides tips on using your computer for the rst time.
Reading the manuals
Read the manuals that come with your computer before using the computer.
Connecting to power
The supplied battery pack is not fully charged at purchase. To charge the battery and begin to use your
computer, install the battery pack, connect the computer to an electrical outlet, and then the battery will be
charged automatically.
Installing the battery pack
For instructions on installing the battery pack, refer to the Safety, Warranty, and Setup Guide that comes
with your computer.
Connecting the computer to an electrical outlet
To connect the computer to an electrical outlet, do the following:
1. Connect the power cord to the ac power adapter.
2. Connect the ac power adapter to the ac power connector of the computer rmly.
3. Plug the power cord into an electrical outlet.
Turning on the computer
Press the power button to turn on the computer.
Conguring the operating system
You might need to congure the operating system when you use the computer for the rst time. The
conguration process might include the following steps:
Accepting the end user license agreement
Conguring the Internet connection
Registering the operating system
Creating a user account
Putting the computer into sleep mode or shutting it down
To conserve power, put the computer into sleep mode or shut it down when the computer is not in use.
10 User Guide