Filter
Top Products
Chapter 4. Troubleshooting
25
Sleep problems
The critical low-battery error
message appears, and the
computer immediately turns off.
• The battery power is getting low. Connect the AC power
adapter to the computer, or replace the battery pack with a
fully charged one.
The computer enters sleep
mode immediately after Power-
on self-test (POST).
• Make sure that:
-The battery pack is charged.
-The operating temperature is within the acceptable range.
See “Chapter 2. Use and care Information” in the Lenovo
Safety and General I
nformation Guide.
Note:
If the battery pack is charged and the temperature is within range, have the computer serviced.
The computer does not return
from sleep mode, and the
computer does not work.
• If your computer is in sleep mode, connect the AC power
adapter to the computer, then press any key or the Power
button.
• If the system still does not return from sleep mode, stops
responding, or cannot be turned off, reset the computer.
Unsaved data may be lost. To reset the computer, press and
hold the Power button for four seconds or more. If the
computer is still not reset, remove the AC power adapter
and
the battery pack.
Display panel problems
The screen is blank. • Do the following:
-If you are using the AC power adapter or the battery pack,
and the battery status indicator is on, press F12( ) to
make the screen brighter.
-If the power indicator is blinking, press the Power button
to resume from sleep mode.
-If the problem persists, follow the solution in the next
problem “The screen is unreadable or d
istorted.”
- Press F9( ) to confirm whether the backlight of the
LCD screen has been turned off.
The screen is unreadable or
distorted.
• Make sure that:
-The display device driver is installed correctly.
- The screen resolution and color quality are correctly set.
-The monitor type is correct.
Incorrect characters appear on
the screen.
• Are the operating system or programs installed correctly?
If they are installed and configured correc
tly, have the
computer serviced.