Filter
Top Products
Diagnostic Error Code FRU/Action
000-250-XXX BIOS APM failure 1. Flash the system. See “Updating (ashing) BIOS
from a CD-ROM or diskette” on page 139
2. System board
000-270-XXX BIOS ACPI failure 1. Flash the system. See “Updating (ashing) BIOS
from a CD-ROM or diskette” on page 139
2. System board
001-000-XXX System Test Passed
No action
001-00X-XXX System Error System board
001-01X-XXX System Error System board
001-024-XXX System Addressing test failure System board
001-025-XXX System Checksum Value error 1. Flash the system. See “Updating (ashing) BIOS
from a CD-ROM or diskette” on page 139
2. System board
001-026-XXX System FLASH data error 1. Flash the system. See “Updating (ashing) BIOS
from a CD-ROM or diskette” on page 139
2. System board
001-027-XXX System Conguration/Setup error 1. Run Setup
2. Flash the system. See “Updating (ashing) BIOS from
a CD-ROM or diskette” on page 139
3. System board
001-032-XXX System Device Controller failure System board
001-034-XXX System Device Buffer Allocation failure
1. Reboot the system
2. Flash the system. See “Updating (ashing) BIOS from
a CD-ROM or diskette” on page 139
3. Run memory test
4. System board
001-035-XXX System Device Reset condition detected System board
001-036-XXX System Register error System board
001-038-XXX System Extension failure
1. Adapter card
2. System board
001-039-XXX System DMI data structure error 1. Flash the system. See “Updating (ashing) BIOS
from a CD-ROM or diskette” on page 139
2. System board
001-040-XXX System IRQ failure 1. Power-off/on system and re-test
2. System board
001-041-XXX System DMA failure 1. Power-off/on system and re-test
2. System board
001-195-XXX System Test aborted by user
Information only Re-start the test, if necessary
001-196-XXX System test halt, error threshold exceeded
1. Press F3 to review the log le
2. Re-start the test to reset the log le
Chapter 7. Symptom-to-FRU Index 45