Filter
Top Products
7. Pull on the tips of the rubber mounts until the rear fan assembly is secured in place.
Figure 35. Installing the rear fan assembly
8. Connect the rear fan assembly cable to the rear fan connector on the system board. See “Locating
parts on the system board” on page 11.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 49
.
Replacing the keyboard or mouse
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page iii.
This section provides instructions on how to replace the keyboard or mouse.
To replace the keyboard or mouse, do the following:
1. Disconnect the old keyboard cable or mouse cable from the computer.
48 ThinkStation User Guide