Lenovo 8178 Computer Accessories User Manual


 
Chapter 5. Diagnostics using PC-Doctor for DOS
Diagnostics are provided by the PC-Doctor program for DOS. These include a full
range of diagnostic utilities to determine the operating condition of the computer’s
hardware components.
You can the run diagnostics from the Rescue and Recovery
workspace or you can
create a bootable diagnostic diskette from the Rescue and Recovery workspace.
Alternatively, you can download either a diskette image or a startable CD-ROM
image (.iso file) from the Customer Support Web site and run diagnostics using
them.
The latest version of the diagnostics program is available from
http://www.lenovo.com/think/support on the World Wide Web. Type your
machine type into the Use Quick path field and click Go to find the downloadable
files that are specific to the computer. See “Diagnostics program download” on
page 50.
Diagnostic error messages appear when a test program finds a problem with a
hardware option. For the test programs to properly determine if a test Passed, Failed
or Aborted, the test programs check the error-return code at test completion. See
“Diagnostic error codes” on page 61.
If an installed device is not recognized by the diagnostics program, that device
might be defective.
Starting PC-Doctor from the Rescue and Recovery workspace
This procedure describes how to start PC-Doctor from the Rescue and Recovery
workspace.
1. If your computer is already on when you start this procedure, shut down the
operating system and turn off the computer.
2. To launch the Rescue and Recovery workspace, repeatedly press the F11 key as
you turn on the computer.
Note: If a user password or an administrator password has been set, the
Rescue and Recovery workspace is not displayed until you type the
password.
3. When the Rescue and Recovery workspace is displayed, look for Troubleshoot
on the left side of the screen. Click Diagnose hardware.
Notes:
a. Additional diagnostic information is available from the Rescue and
Recovery workspace, such as a diagnostic overview. Refer to the Rescue and
Recovery help system for details.
b. After selecting Diagnose hardware, make sure the computer is restarted
using the restart button on the Rescue and Recovery workspace. Do not use
the power switch to start the reboot.
c. You can also create a set of diagnostic disks from the Rescue and Recovery
workspace by clicking Create diagnostic disks from the Rescue and
Recovery menu.
© Lenovo 2005. Portions © IBM Corp. 2005. 49