Filter
Top Products
5. Connect the new mouse to the appropriate connector on the computer.
6. Go to “Completing the parts replacement.”
Completing the parts replacement
After working with parts, you need to replace the computer cover and reconnect
any cables, including telephone lines and power cords. Also, depending on the
part that was replaced, you might need to confirm the updated information in the
Setup Utility program.
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer.
2. Reposition any cables that might impede the replacement of the cover.
3. Close the computer cover.
4. Install any locking devices such as a padlock as necessary.
5. Reconnect the external cables and power cords to the computer. See “Locating
the connectors on the rear of your computer” on page 2.
6. To update the configuration, see ″Starting the Setup Utility″ in the Quick
Reference that was included with your computer.
Note:
In most areas of the world, Lenovo requires the return of the defective CRU.
Information about this will come with the CRU or will come a few days
after the CRU arrives.
12 Hardware Replacement Guide