Filter
Top Products
3. Locate one of the extra five-wire power connectors and connect it to the drive.
See Figure 11.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to Chapter 4, “Completing the parts
replacement,” on page 39.
Installing a diskette drive in bay 3
To install a diskette drive in bay 3:
1. Open the computer cover. See “Opening the cover” on page 12.
2. Remove the front bezel by releasing the three tabs as shown and pivoting the
bezel outward from the top. See Figure 12.
3. Pivot the drive bay assembly upward to gain access to the cable connections
and disconnect the drive bay cables..
Figure 11. Connecting the five-wire power connector to the drive
Figure 12. Removing the front bezel
Chapter 3. Installing options and replacing hardware 19