Filter
Top Products
2050 Antenna assembly
For access, remove these FRUs in order:
v “1010 Battery pack” on page 78
v “1090 Wireless WAN slot cover and PCI Express Mini Card for wireless WAN”
on page 90
v “1100 Palm rest assembly with cables” on page 93
v “1110 PCI Express Mini Card for wireless LAN” on page 96
v “1140 Keyboard” on page 100
v “1150 Keyboard bezel” on page 103
v “1160 LCD unit” on page 106
v “2010 LCD front bezel” on page 124
v “2020 Speaker assembly” on page 125
v “2030 Integrated camera” on page 126
v “2040 Hinges, LCD panel, LCD cable, and LCD rear cover assembly” on page
127
Table 36. Removal steps of antenna assembly
Release the antenna cables from the cable guides of the LCD rear cover assembly
and from the hinges.
1
2 2
1
1
1
1
1
1
1
When installing: Route the cables as shown in this figure. When you route the
cables, make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
130 ThinkPad Edge 14″, Edge 15″, E40, and E50 Hardware Maintenance Manual