Filter
Top Products
THIS MONITOR WILL DISPLAY THE MESSAGE "NO
SIGNAL INPUT OR CABLE DISCONNECTED" IF THERE IS NO
VIDEO INPUT SIGNAL OR THE MONITOR CABLE HAS BEEN
DISCONNECTED FROM THE PC.
Plug and play
Plug and Play DDC2B F eature
This monitor is equipped with VESA DDC2B capability according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of
its identity and, depending on the level of DDC used, communicate additional
information about its display capabilities.
The DDC2B is a bidirectional data channel based on the I2C protocol. The host
can request EDID information over the DDC2B channel.
DDC/CI
This monitor can support DDC
/CI.
13
This feature is designed to conserve electrical energy by reducing power
consumption when there is no video input signal present.when there is no
video input signal present.When there is no video input signal, this monitor,
following a time-out period,will automatically switch to an OFF mode. And the
LED will turn orange. This reduces the monitor's internal power supply
consumption. After the video input signal is restored, full power is restored
and the display is automatically redrawn. The appearance is similar to a
"Screen Saver" feature except the display is completely off. The display is
restored by pressing a key on the keyboard, or clicking the mouse.