Filter
Top Products
20
User Guide
4.1 Restoring the System
The system can develop problems due to erroneous operation or the installation of
additional software. If software problems develop in the originally installed software,
you can restore the system by using system backup and restoration features.
Note: The existing system settings will change after restoration. Check the
settings of the restored system to ensure they match settings that may be
critical to your needs.
Use the following procedure to restore the software to a known functional level:
1. Click
Start
→
All Programs
→
Accessories
→
System Tools
→
System
Restore.
2. Choose either the recommended restore point, or select a different recovery
time from the pop-up box. Choose the latest date when the system was running
properly.
Click
Next to continue.
3. The system will start restoration. When all processes run to completion, the
system displays a message informing you that the restore operation has
completed successfully.
4.2 Backup and Restore
For security purposes, you can back up the system status before you install
additional software, or otherwise modify system settings. To back up the system
status, do the following:
For Windows XP user:
1. Click
Start
→
All Programs
→
Accessories
→
System Tools
→
Backup.
2. Select the location for your backup. Click
Next and follow the instructions to
continue.
For Windows 7 user:
1. Click
Start
→
All Programs
→
Maintenance
→
Backup and Restore.
2. Select the location for your backup. Click
Next and follow the instructions to
continue.
31044392_Q150_UG_EN_V1.0.indd 20 2010.4.20 10:46:59 AM