Table 27. Removal steps of base cover, USB sub card with cable, and PC card slots bezel
assembly (continued)
4
5
a
Step Screw (quantity) Color Torque
4 M2 × 3 mm, flat-head, nylon-coated (1) Silver 0.167 Nm
(1.7
kgfcm)
Note: Make sure that the thermal rubber for FET is firmly attached on the
system board as shown in a. When replacing the rubber, you need to peel the
thin film off from the bottom, and attach it to the system board.
6
6
Step Screw (quantity) Color Torque
6 M2.5 × 4 mm, small-head, nylon-coated (2) Black 0.392 Nm
(4
kgfcm)
94 ThinkPad T61, R61, and R61i (14.1-inch widescreen) Hardware Maintenance Manual