48
IdeaPad S205s Hardware Maintenance Manual
1100 Fan assembly and heat sink assembly
For access, remove this FRU:
• “1010 Battery pack” on page 34
• “1020 Dummy card” on page 35
• “1040 Keyboard” on page 37
• “1050 Base cover” on page 39
• “1060 PCI Express Mini Card for wireless LAN” on page 42
• “1070 LCD unit” on page 44
Figure 10. Removal steps of fan assembly and heat sink assembly
Note: Loosen six screws
1
, but do not remove them. Detach the fan connector
in the direction shown by arrow
2
.
1
1
1
1
1
1
2
When installing: Make sure that the fan connector is attached rmly to the
system board.