Filter
Top Products
Note: If you are using a mouse connected to the serial connector or the USB connector, you
should not use the TrackPoint at the same time. Select Disable rather than Enable or
Auto-Disable.
Solving computer problems
Suspend or hibernation problem
For this troubleshooting, disable the Ethernet port in the Windows NT environment as follows, rather
than using the procedure in the
User's Reference
:
Problem Cause and action
If you are using the port
replicator, resuming
normal operation from
hibernation or suspend
mode takes a long time.
This is not a problem. If you have not connected the network cable, the
computer queries the Ethernet until the timeout timer is reached. Connect
the network cable if you want to use the Ethernet. If you are not using the
network, disable the Ethernet port as follows:
For Windows 98:
1. Double-click a System icon in the Control Panel.
2. Click the Device Manager tab.
3. Double-click Network Adapter.
4. Double-click Intel EtherExpress PRO PCI Adapter.
5. Select the Disable in this hardware profile check box.
6. Click OK.
7. Close all windows.
8. Restart the computer.
For Windows NT:
1. Double-click the Devices icon in the Control Panel.
2. Select Intel EtherExpress PRO Adapter and click Stop.
3. Click Startup... and select Disabled.
4. Click OK.
5. Click Close.
6. Close all windows.
7. Restart the computer by powering it off and on again.
2