Lenovo W701DS Laptop User Manual


 
1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid
state drive (SSD) and storage converter
For access, remove this FRU:
v “1010 Battery pack” on page 88
Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage
converter
1
Step Screw (quantity) Color Torque
1 M3 × 3 mm, wafer-head, nylon-coated (1) Black 0.392 Nm
(4 kgfcm)
Attention:
v Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage
and permanent loss of data.
v Before removing the drive, have the user make a backup copy of all the
information on it if possible.
v Never remove the drive while the system is operating or is in suspend mode.
v When replacing a hard disk drive in a RAID configured array, depending on
which type of array is used, rebuilding the RAID array might be required. For
more information, see “Installing and configuring RAID” on page 71
v In this product, RAID is not enabled by default.
v When you replace the HDD or HDDs used in the models with RAID mode, be
sure to install HDDs that have same FRU no.s both in HDD slot 0 and in slot
1.
v Good or non-failing drives have to be in HDD slot 0 if you have RAID 1.
Removing and replacing a FRU 91