Filter
Top Products
English
English
11
HP 19” Color Monitor User’s Guide
Technical Specifications
Technical Specifications
NOTE When the monitor is turned off with the power button on the front
panel, the power consumption falls below 1W but is not zero. To reach
zero power consumption in “off” mode, either unplug the power outlet
or use a power block with a switch.
PICTURE TUBE
Size 19-inch flat square tube
18.0-inch viewable image (353mm)
Phosphorous Red, Green, Blue P22 (medium short persistence)
Dot pitch 0.26mm
Face Plate Anti-glare, anti-static, screen coating
INPUT SIGNAL
Video 0.7V p p analog RGB
Synchronization TTL level separate synchronization (negative/positive)
INTERFACE
Input Connector 15-pin mini D-SUB
SCANNING
FREQUENCY
Horizontal 30 to 95 kHz
Vertical 50 to 160 Hz
DISPLAY SIZE
366 x 273 mm ±1mm maximum viewable size
MAX RESOLUTION
1600 x 1200 (75Hz)
RECOMMENDED
RESOLUTION
1280 x 1024 (85 Hz)
WARM-UP TIME
30 minutes to reach optimum performance level
PIXEL CLOCK
203 MHz
POWER SOURCE
~100 to 240 V, ~50 to 60Hz
Current 1.5 A (1,5A)
POWER
MANAGEMENT
ON 125W (max) LED Green
Standby mode low LED Amber
Suspend mode 5W LED Amber
Active off mode 5W LED Off
Power off mode 1W LED Off
OPERATING
ENVIRONMENT
Temperature
0
°
C to 40
°
C
Humidity 10% RH through 80% RH (without condensation)
DIMENSIONS
436 (H)
×
446(W)
×
455(D) mm (including pedestal)
WEIGHT
18.4Kg (18,4Kg)
TILT/SWIVEL STAND
Tilt Angle - 5
°
to +12.5
°
(12,5
°)
Swivel Angle ±45
°
p4815a.book Page 11 Monday, March 11, 2002 11:35 AM