LevelOne FCS-1060 Network Card User Manual


 
47
Maintenance
Four actions can be selected
“reboot” click the reboot button to restart system
“factory default” Click on Factory default button on the configuration page to restore the factory
default settings. Any changes made so far will be lost and the system will be reset to the initial
factory settings. The system will restart and require the installer program to set up the network
again.
“Calibrate”
Recalibrate the home position to the default center to recover the tolerance cased by some
external forces. This function is the same as the “Center” button on the Remote Controller. Please
note that there is no confirming message box after clicking on the “Calibrate” button, the Network
Camera will calibrate immediately.
“upgrade firmware” Select the firmware file and click upgrade button