Filter
Top Products
Windows
Peer-to-Peer
This chapter describes operation in a Windows Peer-to-Peer
Networking environment.
Overview
In a peer-to-peer environment, each PC communicates directly with the LevelOne Printer
Server.
The LevelOne Printer Server supports both NetBEUI and TCP/IP. Both protocols can be
used simultaneously.
The following Windows versions are supported:
• Windows 95/98 or ME.
• Windows NT 4.0, Windows 2000 or XP
Setup
Before performing the following procedure, the LevelOne Printer Server must be installed
on your LAN. Both the LevelOne Printer Server and the attached printer should be powered
ON.
1. Run the SETUP program in the PS\Driver\ptp_95nt folder on the CD-ROM.
2. Choose the User option in the "Setup Type" screen. This will install the Peer-to-peer
Print Driver.
3. Follow the prompts to complete the installation.
4. The Print Driver Setup will then run.
5. The LAN will be searched for LevelOne Printer Servers, and a screen like the
following will be displayed.
• If desired, change the Workgroup name and click Refresh.
• Select List all Print Servers to list all LevelOne Printer Servers, regardless of
Workgroup.
• The name of the attached printer will be displayed if possible. If "No printer" is
displayed, check that the printer is properly connected and powered on.
- 65 -