Filter
Top Products
7
Connecting the Network Cable
Four pair of Cat.5 UTP or STP cable with RJ-45 connector is required
for the LevelOne GNC-0101T 64bit 10/100/1000Mbps Gigabit
Ethernet Adapter. You can use standard or crossover cable to connect
the switch MDI-X or MDI-II port, because the LevelOne GNC-0101T
64bit 10/100/1000Mbps Gigabit Ethernet Adapter will adjust the
correct signal automatically.
Software Installation
Before you connect the LevelOne GNC-0101T 64bit
10/100/1000Mbps Gigabit Ethernet Adapter to the network, you have
to install the network driver first. The driver for each networking
operating system is under a separate directory. A HELP.EXE file
under root directory lists the information and detailed installation
procedure of all the available drivers.