Filter
Top Products
27
Once you want to modify the VLAN Group, check on the ID
parameter, the ID VLAN configuration window will pop out.
Figure 21. VLAN Settings
Trunk Setting
The Trunk function enables to cascade two devices with a double
times bandwidth (maximum up to 1.6Gbps in full duplex mode).
There are three selections in each group of trunk setting as follow:
Group 1: Selection 1(disable), Selection 2(port 1, 2), Selection 3(port 1, 2, 3, 4).
Group 2: Selection 1(disable), Selection 2(port5, 6), Selection 3(port 5, 6, 7, 8).
Figure 22. Trunk Settings
Be sure that the selected trunk setting port must connect to the device
with a same VLAN group.