Filter
Top Products
6
used.
Port Type Cable Type Connector
1000BASE-T Cat.5 TP RJ-45
100BASE-TX Cat.5 TP RJ-45
10BASE-T Category 3, 4 or 5 TP RJ-45
Note: Category 5 TP cable recommended whenever installing new cabling.
To transmit at 1000Mbps requires Category 5 TP cable using Four (4) pairs Twisted-Pair wire.
2.3.3 Status LEDs
The Switch comes with a complete range of LEDs. The table below lists each LEDs name, color
and a brief description of its function.
GSW-0440T
Name Color Function
Pwr Green Lit: Power "On"
1000 Green Lit: Link on 1000Mbps speed
100 Green Lit: Link on 100Mbps speed
LNK/ACT Green Lit: Link on
Blink: Sending or receiving packets
FDX/COL Amber Lit: Full-Duplex operation
Blink: Collision occurs in Half-Duplex operation
GSW-0840T
Name Color Function
Green Power on, normal operation Power
Off Power off
Green Link On
Blink Activity
Link/Act
Off Link Off
Green 1000M Speed 1000M
Off Not 1000M Speed
Green 100M Speed 10M/100M
Off 10M speed
Full Green Full-duplex mode
Collision Blinking Collision
Half Off Half-duplex mode
2.4 The Rear Panel
GSW-0440T