Filter
Top Products
62
4.7.5 Routing Table
Routing Tables
allow you to determine which physical interface address to use for outgoing IP data
grams. If you have more than one routers and subnets, you will need to enable routing table to allow
packets to find proper routing path and allow different subnets to communicate with each other.
Routing Table settings are settings used to setup the functions of static and dynamic routing.
RIP Enable:
Check to enable RIP function.
Static Routing: For static routing, you can specify up to 8 routing rules. You can
enter the destination IP address, subnet mask, gateway, hop for each routing rule, and
then enable or disable the rule by checking or unchecking the Enable checkbox.
Example: