Filter
Top Products
35
search and configure printer servers on other subnets across network
segments. You must use Remote Ports Utility described in the next
section to manage remote (across network segments) printer servers.
Select the network ports in the “Available Ports” list and click “>” to
add ports. If you want to add all available ports, please click “>>”. To
cancel some of the network ports or all ports from the “Chos en Ports” list,
please click “<” or “<<”.
3.5.2 Remote Ports (Utility)
Remote Ports Utility offers a convenient way for you to manage and
add printer port of the remote printer server. From the assistant of this
utility, you can print to other printer servers outside the subnet across
network segment. However, please note that this function only supports
TCP/IP network protocol.
Please follow the procedures described below:
Step1. Run Remote Ports Utility. Clicks “Add” to add a remote
print port.
Step2. Enter printer server’s name, IP address, select used ports,
and enter LPR queue name of each port. Click “Ok”.