Leviton 2206 Surge Protector User Manual


 
llkUW-OnK&mOU
RESIDENTIAL POWERLINE
CARRIER COMPONENTS
SINGLE POLE SWITCH MODULE
INSTALLATION INSTRUCTIONS
&
Wiring Diagram
Cat. No. 6291
mmn
TO BE INSTALLED
AND/OR
USED IN ACCORDANCE WITH
APPROPRIATE ELECTRICAL CODES AND
REGULATIONS.
RATING:
20A-120V/
60Hz
AC ONLY
Minimum Voltage:
112V
Maximum Voltage:
138V
Maximum number of Modules per circult: 10
ENGINEERING
DATA:
Input
Signal
121 kHz carrier signal superimposed
on a
12OV
AC power line.
Mlnlmum
Signal
Strength:
100mV.
Ambient
Operating Temperature: Minimum 0° F
(-18°C)
to Maxlmum 104°F (40°C).
Ambient
Humidity:
0 to 90% RH, non-condensing.
DESCRIPTION:
This Wall Switch Module is designed for use with
Levlton
Decora
Electronic Control (DEC) Powerline
Carder Components. It functions as a remote
control
switching
device which responds to ON/OFF
and ALL LIGHTS ON/OFF commands, from one or
more DEC controllers remotely located from the
module. The switch module can also be operated
manually as a standard type wall switch.
2
The module may be set to any of the 256 address
codes, selected at the time of installation. The
desired address Is set by removing the touchplate
and selecting letter and number codes with a small
blade screwdriver. The module is equipped with
back wire terminals and installs easily in a
standard
wall box. It is
suitable
for incandescent and
fluores-
cent lighting, as well as switch controlled appliance
when Dimming Is not desired.
The Cat. No.
6291
is assembled as white and an
ivory color conversion kit is provlded.
This
product
fits any color
Decora
Wallplate (sold separately).
Additional color conversion
kits
are available.
SAVE THIS INSTRUCTION
SHEET!
IT CONTAINS IMPORTANT TECHNICAL DATA,
TESTlNG,
AND TROUBLE
SHOOTING
INFORMA-
TION
WHICH WILL BE USEFUL AFTER
INSTAL-
LATION
IS COMPLETE.
IMPORTANT: Unlike standard single pole wall
switches the Cat. No. 6291 also requires a neutral
(white)
wire
for operation.
Home Automation Systems, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com