Filter
Top Products
Notes:
• Do not exceed the maximum stack height by forcing paper under the stack height limiter.
• Do not load or close a tray while a job is printing.
• Load only one size and type of paper or specialty media at a time.
• Load envelopes with the flap side down.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self‑stick adhesives. These envelopes may severely damage the printer.
6 Adjust the width guide to lightly touch the edge of the paper stack.
Note: Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
7 From the printer control panel, set the Paper Size and Paper Type.
Loading the envelope feeder
1 Adjust the envelope support for the length of envelope you are loading:
• Short envelopes—Fully close the envelope support.
• Medium‑length envelopes—Extend the envelope support to the middle position.
• Long envelopes—Fully open the envelope support.
2 Lift the envelope weight back toward the printer.
3 Slide the width guide to the right.
Loading paper and specialty media 74