Filter
Top Products
Menu item Description
Download Target
RAM
Flash
Disk
Sets the storage location for downloads
Notes:
• RAM is the factory default setting.
• Storing downloads in flash memory or on a printer hard
disk places them in permanent storage. Downloads
remain in flash memory or on the printer hard disk even
when the printer is turned off.
• Storing downloads in RAM is temporary.
• This menu appears only if a flash and/or disk option is
installed.
Job Accounting
On
Off
Specifies whether the printer stores statistical information
about the most recent print jobs on the hard disk
Notes:
• Off is the factory default setting. Off means the printer
does not store job statistics.
• The statistics include a record of print errors, the print time,
the job size in bytes, the requested paper size and type,
the total number of printed pages, and the total number
of copies requested.
• Job Accounting is available only when a printer hard disk
is installed and working properly. It should not be
Read/Write or Write protected. Job Buffer Size should not
be set to 100%.
• Changing this setting from the printer control panel and
then exiting the menus causes the printer to reset. The
menu selection is updated.
Resource Save
On
Off
Specifies how the printer handles temporary downloads, such
as fonts and macros stored in RAM, when the printer receives
a job that requires more memory than is available
Notes:
• Off is the factory default setting. Off sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
• The On setting retains the downloads during language
changes and printer resets. If the printer runs out of
memory, 38 Memory Full appears, and downloads are
not deleted.
Understanding printer menus
222