Filter
Top Products
Fax Station Name not set up.
Contact system
administrator. 298
Fax Station Number not set up.
Contact system
administrator. 298
Imaging unit low [84.xy] 298
Imaging unit nearly low
[84.xy] 298
Imaging unit very low, [x]
estimated pages remain
[84.xy] 298
Incompatible output bin [x]
[59] 298
Incompatible tray [x] [59] 299
Incorrect paper size, open [paper
source] [34] 299
Insert hole punch box 299
Insert staple cartridge 299
Insert Tray [x] 299
Install bin [x] 299
Install duplex 300
Install Tray [x] 300
Insufficient memory for Flash
Memory Defragment operation
[37] 300
Insufficient memory to collate job
[37] 300
Insufficient memory to support
Resource Save feature [35] 301
Insufficient memory, some Held
Jobs were deleted [37] 301
Insufficient memory, some held
jobs will not be restored
[37] 301
Load [paper source] with [custom
string] [paper orientation] 301
Load [paper source] with [custom
type name [paper
orientation] 301
Load [paper source] with [paper
size] [paper orientation] 301
Load [paper source] with [paper
type] [paper size] [paper
orientation] 302
Load Manual Feeder with [custom
string] [paper orientation] 302
Load Manual Feeder with [custom
type name] [paper
orientation] 302
Load Manual Feeder with [paper
size] [paper orientation] 302
Load manual feeder with [paper
type] [paper size] [paper
orientation] 302
Load staples 303
Maintenance kit low [80.xy] 303
Maintenance kit nearly low
[80.xy] 303
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 303
Memory full [38] 303
Memory full, cannot print
faxes 303
Memory full, cannot send
faxes 304
Network [x] software error
[54] 304
No analog phone line connected
to modem, fax is disabled. 304
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 304
Not enough free space in flash
memory for resources [52] 304
Paper changes needed 305
Parallel port [x] disabled [56] 305
Printer had to restart. Last job
may be incomplete. 305
Reattach bin [x] 305
Reattach bins [x] – [y] 306
Reinstall missing or unresponsive
cartridge [31.xy] 306
Reinstall missing or unresponsive
imaging unit [31.xy] 306
Remove defective disk [61] 306
Remove packaging material, [area
name] 307
Remove paper from [linked set bin
name] 307
Remove paper from all bins 307
Remove paper from bin [x] 307
Remove paper from standard
output bin 307
Replace all originals if restarting
job. 307
Replace cartridge, 0 estimated
pages remain [88.xy] 307
Replace cartridge, printer region
mismatch [42.xy] 307
Replace imaging unit, 0 estimated
pages remain [84.xy] 308
Replace jammed originals if
restarting job. 308
Replace last scanned page and
jammed originals if restarting
job. 308
Replace maintenance kit, 0
estimated pages remain
[80.xy] 309
Replace missing fuser [80.xx] 309
Replace roller kit [81.xx] 309
Replace separator pad 309
Replace unsupported cartridge
[32.xy] 309
Replace unsupported imaging unit
[32.xy] 309
Replace wiper 309
Restore held jobs? 310
Scan document too long 310
Scanner automatic feeder cover
open 310
Scanner disabled by admin
[840.01] 310
Scanner disabled. Contact system
administrator if problem persists.
[840.02] 310
Scanner jam, remove all originals
from the scanner [2yy.xx] 310
Scanner jam, remove jammed
originals from the scanner
[2yy.xx] 310
Scanner maintenance required
soon, use ADF Kit [80] 310
Serial option [x] error [54] 310
Serial port [x] disabled [56] 311
Some held jobs were not
restored 311
Standard network software error
[54] 311
Standard USB port disabled
[56] 311
Supply needed to complete
job 311
Too many bins attached [58] 311
Too many disks installed [58] 312
Too many flash options installed
[58] 312
Too many trays attached [58] 312
Tray [x] paper size
unsupported 312
Unformatted flash detected
[53] 312
Unsupported camera mode,
unplug camera and change
mode 313
Index 386