Filter
Top Products
Light Light status What it means
Power On The printer is online.
Ready On The printer is online and ready to print.
Blinking The printer is receiving data.
Off The printer is offline.
Tractor 2 On Tractor 2 is activated.
Note: The optional Tractor 2 Feeder must be installed.
Paper Out Off Paper is loaded in the printer.
Blinking The printer is out of paper.
On A printer error has occurred.
On The control panel is locked, restricting the use of the following buttons: Start/Stop, FormFeed,
Tear Off, and Load/Unload.
Font On One of the printer resident fonts is selected.
Off A downloaded font is selected.
Font Lock On Font Lock is active. Printer resident fonts are locked.
Light Light status What it means
Macro On The specified macro function is active.
Off No macro is being used, or Macros are disabled in the Setup menu.
Pitch On One of the printer resident pitches is selected.
Pitch Lock On Pitch Lock is active. Printer resident fonts are locked.
Using the Load/Unload function
Use the Load/Unload button to unload continuous forms from the printer to allow printing on either a cut form or an
envelope.
The Load/Unload function works only when the tractor unit is in the push position.
You can also use the Load/Unload button to load continuous forms into the printer when the paper path is clear, or to
change one type of pre‑printed form to another.
Locking and unlocking the control panel
To restrict the use of printer functions to the Start/Stop, FormFeed, Tear Off, and Load/Unload buttons, lock the control
panel. When the panel is locked, the
light comes on.
To lock the control panel:
1 Turn the printer off.
2 Press and hold Load/Unload and Tractor while turning the printer on.
Using the control panel 10