Filter
Top Products
5 From the drop‑down box for each supply, select among the options for notification. Explanations for each option
are provided.
6 Click Submit to save your selections.
Copying printer settings to other printers
Using the Embedded Web Server, you can copy printer settings to up to 15 other network printers.
1 Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
• View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
• Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2 Click Copy Printer Settings.
3 To change the language, select a language from the drop‑down list, and then click Click here to submit language.
4 Click Printer Settings.
5 Enter the IP addresses of the source and target printers.
Note: To add additional target printers, click the Add Target IP button.
6 Click Copy Printer Settings.
Restoring the factory default settings
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until General Settings appears, and then press .
4 Press the arrow buttons until Factory Defaults appears, and then press .
5 Press the arrow buttons until Restore Now appears, and then press .
Wait for Submitting Changes to appear momentarily, followed by Restoring Factory Defaults,
before the printer returns to Ready.
Warning—Potential Damage: Restore Now returns all printer settings to the factory default settings except
Network/Port menu settings. All downloads stored in RAM are deleted. Downloads stored in flash memory are
not affected.
Administrative support
91