Filter
Top Products
Fax partition inoperative. Contact
system administrator. 298
Fax server 'To Format' not set up.
Contact system
administrator. 299
Fax Station Name not set up.
Contact system
administrator. 299
Fax Station Number not set up.
Contact system
administrator. 299
Imaging unit low [84.xy] 299
Imaging unit nearly low
[84.xy] 299
Imaging unit very low, [x]
estimated pages remain
[84.xy] 299
Incompatible output bin [x]
[59] 299
Incompatible tray [x] [59] 300
Incorrect paper size, open [paper
source] [34] 300
Insert hole punch box 300
Insert staple cartridge 300
Insert Tray [x] 300
Install bin [x] 300
Install duplex 301
Install Tray [x] 301
Insufficient memory for Flash
Memory Defragment operation
[37] 301
Insufficient memory to collate job
[37] 301
Insufficient memory to support
Resource Save feature [35] 302
Insufficient memory, some Held
Jobs were deleted [37] 302
Insufficient memory, some held
jobs will not be restored
[37] 302
Load [paper source] with [custom
string] [paper orientation] 302
Load [paper source] with [custom
type name [paper
orientation] 302
Load [paper source] with [paper
size] [paper orientation] 302
Load [paper source] with [paper
type] [paper size] [paper
orientation] 303
Load Manual Feeder with [custom
string] [paper orientation] 303
Load Manual Feeder with [custom
type name] [paper
orientation] 303
Load Manual Feeder with [paper
size] [paper orientation] 303
Load manual feeder with [paper
type] [paper size] [paper
orientation] 303
Load staples 304
Maintenance kit low [80.xy] 304
Maintenance kit nearly low
[80.xy] 304
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 304
Memory full [38] 304
Memory full, cannot print
faxes 304
Memory full, cannot send
faxes 305
Network [x] software error
[54] 305
No analog phone line connected
to modem, fax is disabled. 305
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 305
Not enough free space in flash
memory for resources [52] 305
Paper changes needed 306
Parallel port [x] disabled [56] 306
Printer had to restart. Last job
may be incomplete. 306
Reattach bin [x] 306
Reattach bins [x] – [y] 307
Reinstall missing or unresponsive
cartridge [31.xy] 307
Reinstall missing or unresponsive
imaging unit [31.xy] 307
Remove defective disk [61] 307
Remove packaging material, [area
name] 308
Remove paper from [linked set bin
name] 308
Remove paper from all bins 308
Remove paper from bin [x] 308
Remove paper from standard
output bin 308
Replace all originals if restarting
job. 308
Replace cartridge, 0 estimated
pages remain [88.xy] 308
Replace cartridge, printer region
mismatch [42.xy] 308
Replace imaging unit, 0 estimated
pages remain [84.xy] 309
Replace jammed originals if
restarting job. 309
Replace last scanned page and
jammed originals if restarting
job. 309
Replace maintenance kit, 0
estimated pages remain
[80.xy] 310
Replace missing fuser [80.xx] 310
Replace roller kit [81.xx] 310
Replace separator pad 310
Replace unsupported cartridge
[32.xy] 310
Replace unsupported imaging unit
[32.xy] 310
Replace wiper 310
Restore held jobs? 311
Scan document too long 311
Scanner automatic feeder cover
open 311
Scanner disabled by admin
[840.01] 311
Scanner disabled. Contact system
administrator if problem persists.
[840.02] 311
Scanner jam, remove all originals
from the scanner [2yy.xx] 311
Scanner jam, remove jammed
originals from the scanner
[2yy.xx] 311
Scanner maintenance required
soon, use ADF Kit [80] 311
Serial option [x] error [54] 311
Serial port [x] disabled [56] 312
Some held jobs were not
restored 312
Standard network software error
[54] 312
Standard USB port disabled
[56] 312
Supply needed to complete
job 312
Too many bins attached [58] 312
Too many disks installed [58] 313
Too many flash options installed
[58] 313
Too many trays attached [58] 313
Index 388