Filter
Top Products
When these operators are used, it is equivalent to executing the following PostScript emulation sequence:
<< /PageSize [x y]/ImagingBBox null /Policies << /PageSize 0>> >>
setpagedevice
where x y are the PageSize in points.
Tray selected with tray operators
= Supported
X = Not supported
Printer models
Operator Tray selected (corresponding image size is set) C950 X950, X952, X954
a4tray tray with A4-size paper
a5tray tray with A5-size paper
b5tray tray with B5-size paper
customtray tray with custom-size paper XX
executivetray tray with executive-size paper
foliotray tray with folio-size paper
legaltray tray with legal-size paper
lettertray tray with letter-size paper
oficiotray tray with oficio‑size paper
b4tray tray with B4‑size paper
a3tray tray with A3‑size paper
ledgertray tray with ledger‑size paper
11x17tray tray with 11 x 17‑size paper
statementtray tray with statement-size paper
a6tray tray with A6-size paper
PostScript envelope size support
The literal names in “Envelope sizes supported” on page 16 are also supported as operators in userdict. These
operators change the image size, but do not change the active paper source. Therefore, when these operators are used,
part of the image may be clipped.
When these literal names are used as operators, it is equivalent to executing the following PostScript emulation
sequence. The following example uses a 3.875 x 7.5 envelope.
<</Policies <</PageSize 7>> /PageSize [279 540]>> >>setpagedevice
PostScript (PS) emulation 15