Filter
Top Products
97Clearing Jams
At entry into the envelope feeder Since the envelope feeder feeds envelopes from the bottom of the
stack, the envelope on the bottom is jammed.
1 Slide the attached envelope weight up.
2 Flip the envelope weight over and back toward the printer.
3 Remove the stack of envelopes from the envelope feeder.
4 Pull the jammed envelope straight out toward you.
5 Replace the stack of envelopes in the envelope feeder.
6 Adjust the envelope edge guide if needed.
7 Rotate the envelope weight and lower it to the stack.
N
OTE
:
If you perform the above steps and envelope jams continue
to occur, feeding a single envelope between steps 4 and 5
may correct the problem.