Filter
Top Products
Use To
Print Recovery
Page Protect
Off
On
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
• Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the
entire page prints.
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Set the printer to hibernate mode even when there is an active
Ethernet connection.
Note: Do Not Hibernate is the factory default setting.
Press Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: Do Nothing is the factory default setting.
Factory Defaults
Do Not Restore
Restore Now
Restore printer settings to its factory defaults.
Notes:
• Do Not Restore is the factory default setting. This keeps the
user‑defined settings.
• Restore Now returns all scanner settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted.
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text [x]
Show information pertaining to the selected Custom Home
Messages on the printer display.
Copy Settings menu
Use To
Content Type
Text
Graphics
Text/Photo
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Understanding the printer menus 104