Filter
Top Products
3
2
Printing from Windows
Your printer is set up, your Lexmark driver is installed — you are ready to print. Want to print
transparencies, add a Do Not Copy watermark, make the colors on a chart more vibrant? It’s easy to
change printer settings for any job you print.
-FOR EXAMPLE-
Let’s say your printer has plain paper loaded in tray 1, but you want to print a letter from tray 1 and an
envelope from the manual feeder (or multipurpose feeder if installed).
1 Load letterhead in tray 1 and an envelope in the manual feeder (or multipurpose feeder) and
change the corresponding operator panel settings.
2 Open the File Menu from your software application.
3 Choose Print (or Printer) Setup to open your printer driver.
4 In the Print Setup dialog box, click Properties, Options, or Setup (depending on the
application).
5 Click the Setup tab.
6 From the Paper Type setting, select Letterhead.
7 In the Print dialog box, click OK to print your job.
Now print the envelope:
1 In the Print Setup dialog box, click Properties.
2 Click the Setup tab.
3 From the Paper Type setting, select the size envelope you want.
4 Change Orientation to Landscape.
5 In the Print dialog box, click OK to print your job.
If you need an explanation about a printer setting, help is just a click away:
• Click the Help box in the bottom right corner of any dialog box.
• Click the question mark at the top of any dialog box and then move your cursor to the setting
you want to know about.
• Move your cursor to the setting in question and press F1 or right-click your mouse.