Filter
Top Products
13
5
Changing operator panel settings
Changing settings from the operator panel affects everyone who uses the printer. Changing settings
from your software application or printer driver override everything except the Paper Size and Paper
Type settings on the operator panel, but the new settings only apply to the job you are sending to the
printer. If your print job requires reconfiguring the printer (i.e., printing on media that is different from
what is loaded), change the operator panel settings and driver settings.
-FOR EXAMPLE-
Let’s say you share the printer. It is configured with plain paper in tray 1, legal paper in tray 2 and
transparencies in the multipurpose feeder.
You want to print a scanned image with the highest print quality from the multipurpose feeder.
1 Load Photo Paper in the multipurpose feeder.
2 Press Menu> until you see Paper Menu.
3 Press Select.
Paper Source appears on the second line.
4 Press Select.
5 Press Menu> until you see MP Feeder on the second line of the display.
6 Press Select.
An asterisk appears indicating that MP Feeder is the new default setting.
7 Press Menu> until Paper Type appears on the second line of the display.
8 Press Select.
9 Press Menu> until MP Feeder Type appears on the second line of the display.
10 Press Select.
11 Press Menu> until Photo Paper appears.
12 Press Select.
An asterisk appears indicating that Photo Paper is the new default setting for the MP Feeder.
13 Press Return to go back to Ready.
14 In your printer driver, change the Print Quality setting to Best and Paper Type to Photo.
15 Send your job.