73
Message:Check MPF
Connection
Either the multipurpose feeder has been removed from the printer, or it is attached but not completely
connected. If you are not using the multipurpose feeder, press
Go to clear the message. If you are
using the multipurpose feeder, reattach it.
Message:Insert Duplex
Pages & Press Go
The front side of the manual duplex job is printed. Remove the pages and reinsert them face up in tray
1 to print the other side.
Message:Insert <tray>
The tray is not in the printer. Reinsert the tray to clear the message.
Message:Install Tray x
or Cancel Job
The tray was removed before a job sent to that tray printed. Reinsert the tray or press Menu> and
select Cancel Job.
Message:Load <input source>
<type> <size>
The tray is out of paper. Load paper to clear the message.
Message:Load Manual
<type> <size>
The manual feeder or multipurpose feeder is waiting to print a manual feed job. Load a sheet of paper
or an envelope. If a sheet or envelope is already in the manual feeder or multipurpose feeder, press
Go to clear the message.
Message:34 Short Paper
The wrong size paper is selected in the Paper Size menu. Select the correct size and press Go to
clear the message, or press
Menu> and select Cancel Job.
PerfectFinish
Message: 87 PerfectFinish
Empty
The PerfectFinish cartridge is empty and must be replaced. To continue printing your job without
PerfectFinish, press
Go to clear the message.
Message: Printer Calibrating
This message appears whenever the PerfectFinish cartridge applicator is refilling. You may hear
some clicking sounds as the cartridge applicator refills. Once the cartridge applicator is refilled, you
may resume printing.