Filter
Top Products
{ Multi-part snap-out forms must meet the following specifications:
Pressure sensitive paper (3 sheets maximum)
First sheet 70 - 80g/m2 (19 - 21 lb)
2nd sheet 40 - 60g/m2 (11 - 16 lb)
Last sheet 70 - 80g/m2 (19 - 21 lb)
Carbon sets (3 sheets maximum)
First sheet 70 - 80g/m2 (19 - 21 lb)
2nd sheet 35 - 40g/m2 (9 - 11 lb)
Last sheet 70 - 80g/m2 (19 - 21 lb)
Carbon paper 25g/m2 (6.6 lb) approximate
(Carbon non-coated surface must be rough.)
Snap-out perforation
First sheet 3 : 0.8-mm
2nd sheet 7 : 0.8-mm
Last sheet 7 : 0.8-mm
(Micro-perforations allowed for first and last
sheets, 72 perfs per inch recommended.)
{ Multi-part top-glued forms must have a top edge that is flat, smooth, and free from any
traces of glue. Form sets cut against the grain are more acceptable than sets cut with
the grain.
z Automatic Sheet Feed Paper Recommendations
{ Unsatisfactory paper and forms (the following are some of the papers and forms that do
not perform reliably or may cause damage to the sheet feed mechanism):
Coated paper
Vellums
Highly sized erasable bond
Synthetic paper
Translucents
Some paper with a cockle finish
Some multi-part forms not meeting specifications
Some pressure sensitive adhesive labels
Some chemically treated paper (ink-impregnated paper)
Some preprinted forms requiring high registration accuracy for character location
Card stock
Some preprinted paper containing chemicals that contaminate the sheet feed
mechanism or change the frictional characteristics of the paper
Stapled or clipped forms
Paper with gum surfaces, holes, perforations, cutouts or windows
Paper with embossment height exceeding 0.5-mm (0.020 in.). (Embossments
must not be located within 15-mm (0.59 in.) of any edge of a sheet)
Folded documents
Paper with curl or waviness exceeding 3-mm (0.118 in.)
Reams with edges or corners folded or bonded together
Paper with poorly cut or rough edges
{ Paper used in the ASF should be new, unused, and without packaging damage.
{ Paper of different types (letterhead, plain, etc.), sizes, or composition should not be
mixed or interleaved in the same ASF bin.
{ Paper should not be exposed to adverse temperature and humidity conditions. (Consult
Pa
g
e 12 of 16IBM Offerin
g
Information - 4247-A00 IBM Serial Matrix Printer Model A00
6/16/2004htt
p
://www-306.ibm.com/common/ssi/OIX.wss?DocURL=htt
p
://d03xhtt
p
cl001
g
.boulder.i...