Filter
Top Products
Diagnostic Information 2-29
4085-001
Attendance Message Description Action
Check Tray x
Connection
Check MPF
Connection
A representation of
the operator panel
when the printer loses
communications with
one of the following
devices:
-Tray 2
-Multi-Purpose Feeder
This error could occur
in two ways. The
specified device could
have been removed
from the printer (for
instance, to clear a
paper jam or to
uninstall the device).
Otherwise, the device
could still be attached
to the printer, but is
experiencing a
communications
problem (Not fully
connected or
hardware failure).
If the device was
temporarily removed or
not connected properly,
reattach or reconnect it.
When the device is
recognized, the printer
automatically clears the
attendance condition and
continues.
If the device is
experiencing a hardware
problem, then turn the
printer off and back on. If
the error occurs again,
then turn the printer off,
remove the option, and
call for service.