Filter
Top Products
118
Solving option problems
Solving problems with the optional 2000-sheet drawer
Problem Solution
The elevator tray does not raise when the
loading door is closed, or the elevator tray
does not lower when the door is opened
and the elevator button is pushed.
Check the following:
• The printer is properly attached to the 2000-sheet drawer.
• The printer is powered on.
• The power cord is plugged firmly into the back of the
2000-sheet drawer.
• The power cord is plugged into an outlet.
• The outlet has power to it.
The elevator tray lowers unexpectedly. Check to see if your printer is out of print media or has a jam.
More than one sheet of print media is fed
or a sheet is fed improperly.
Remove the print media in the printer paper path and check the
stack to ensure the print media has been loaded properly. Be
sure to remove the top and bottom sheets of each ream of paper
that is loaded.
A jam occurs.
Rubber feed rollers do not turn to advance
print media.
Check the following:
• The power cord is plugged firmly into the back of the
2000-sheet drawer.
• The power cord is plugged into an outlet.
• The outlet has power to it.
Consistent misfeeds or jams in the
drawer.
Try the following:
• Flex the paper.
• Turn the print media over.
Check the following:
• Drawer is properly installed.
• Print media is loaded correctly.
• Print media is not damaged.
• Print media meets specifications.
• Guides are positioned correctly for the print media size
selected.
Service Messages A service message indicates printer failure that may require
service.
Turn the printer off, wait about 10 seconds, and then turn the
printer on.
If the error recurs, write down the error number, the problem, and
a detailed description. Call for service.
Short Paper Error Make sure the size selector knob is set to the correct print media
size.