Lexmark T632 Printer User Manual


 
236
Using the printer menus
Select a menu item for more details:
Note: Values marked by an asterisk (*) are the factory default settings.
Printer Language
Purpose:
To establish the default printer language used to communicate data from the computer to the printer.
Values:
Note: Setting a printer language as the default does not prevent a software application
from sending print jobs that use the other language.
Power Saver
Purpose:
To specify the amount of time (in minutes) the printer waits after a job is printed before it goes into a
reduced power state.
Values:
The factory default Power Saver setting depends on your printer model. Print the menu settings page
to determine the current Power Saver setting. When the printer is in Power Saver mode, it is still
ready to receive print jobs.
Select 1 to put the printer in Power Saver mode one minute after it finishes a print job. This uses
much less energy, but requires more warm-up time for the printer. Select 1 if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Alarm Control Power Saver
Auto Continue Print Timeout
Display Language Printer Language
Download Target Resource Save
Jam Recovery Staple Alarm
Job Accounting Toner Alarm
Page Protect Wait Timeout
PCL Emulation* PCL emulation, compatible with Hewlett-Packard printers.
PS Emulation PostScript emulation, compatible with Adobe PostScript language.
Disabled Disables Power Saver; the fuser remains warm and ready to print at all times.
1...240 Specifies the amount of time after a print job before the printer goes into
Power Saver mode. (Your printer may not support the entire range of values.)