Lexmark T632 Printer User Manual


 
259
Using the printer menus
Values:
See also:
PS SmartSwitch; Printer Language
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the serial port requires it, regardless of the default printer language.
Values:
See also:
PCL SmartSwitch; Printer Language
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Values:
Note: Changing this menu item automatically resets the printer.
On* Printer examines data on the serial interface and selects PCL emulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation
to process the job if PS SmartSwitch is On, or uses the default printer language
specified in the Setup Menu if PS SmartSwitch is Off.
On* Printer examines data on the serial interface and selects PostScript emulation if the
data indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PCL emulation to
process the job if PCL SmartSwitch is On, or uses the default printer language
specified in the Setup Menu if PCL SmartSwitch is Off.
On Printer performs NPA processing. If data is not in NPA format, it is rejected as
bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it
appropriately.