Filter
Top Products
271
Understanding the printer messages
Queuing Jobs The printer is sending one or more
held jobs to print.
Wait for the message to clear.
See also: Using the Print and
Hold function
Ready The printer is ready to receive and
process print jobs.
Send a job to print.
Ready Hex The printer is in Hex Trace mode and
is ready to receive and process print
jobs.
• Send a job to print. All data sent
to the printer is printed in
hexadecimal and character
representation. Control strings
are printed, not executed.
• Turn the printer off and then on to
exit Hex Trace mode and return
to Ready status.
Reattach <device> The specified device is either not fully
connected to the printer or is
experiencing a hardware failure.
<device>
is one of the following:
• Output bin x, where x is 1–3
• Bins x - y, where x is 1–5, 2–6,
6–10
• Env Feeder
• Reestablish communication by
removing the specified device
and reattaching it to the printer.
• Press Go to clear the message
and continue printing without
using the device.
• In the case of a hardware failure,
turn the printer off and back on. If
the error recurs, turn the printer
off, remove the specified device,
and call for service.
See also: Contacting service
Remove Paper <specified
bin>
The specified output bin, or bins, is
full. The message would read as one
of the following:
• Remove Paper Standard Bin
• Remove Paper Output Bin x,
where x is the bin number
• Remove Paper All Output Bins
Remove the stack of paper from the
specified bin(s) to clear the
message.
Res Reduced The printer is reducing the resolution
of a page in the current job from 600
dots per inch (dpi) to 300 dpi to
prevent a 38 Memory Full error. Res
Reduced remains on the display while
the job prints.
Press Menu to open the Job Menu
and cancel the current job.
Resetting Active Bin The printer is resetting to the active
bin in a linked set of bins.
Wait for the message to clear.
Resetting
Maint Cnt Value
The printer is resetting the counter
that tracks wear on the fuser.
Wait for the message to clear.
Resetting the Printer The printer is resetting to the current
default settings. Any active print jobs
are canceled.
Wait for the message to clear.
See also: Using the operator
panel to change printer settings
Message What this message means What you can do