Filter
Top Products
Menu item Description
Recycled
Paper
Card Stock
Transparency
Labels
Vinyl Labels
Envelope
Specifies a paper type when the Recycled setting is selected in other
menus
Notes:
• Paper is the factory default setting.
• The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Universal Setup menu
These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options,
such as support for duplex printing and printing multiple pages on one sheet.
Menu item Description
Units of Measure
Inches
Millimeters
Identifies the units of measure
Notes:
• Inches is the US factory default setting.
• Millimeters is the international factory default setting.
Portrait Width
3–14 inches
76–360 mm
Sets the portrait width
Notes:
• If the width exceeds the maximum, the printer uses the maximum
width allowed.
• 8.5 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.
• 216 mm is the international factory default setting. Millimeters
can be increased in 1-mm increments.
Portrait Height
3–14 inches
76–360 mm
Sets the portrait height
Notes:
• If the height exceeds the maximum, the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
• 356 mm is the international factory default setting. Millimeters
can be increased in 1-mm increments.
Understanding printer menus
106