Filter
Top Products
Solving finisher problems
Paper handling
Maintenance
Troubleshooting
Administration
Index
6
Printing
www.lexmark.com
Lexmark W820
Aprintermessage
indicates that all
linked binsare full,
butsomebinsare
empty.
Thereisnobinavailable
to perform the finishing
functions requested by
the print job because the
bin is full.
To clear the message, remove the stack of paper
from the bin.
The 287 Paper
Jam Open
Deflector G
message displays
after you install
the finisher.
The divertor cover is
installed incorrectly.
Remove and realign the divertor cover. Refer to
the
Setup Guide
for instructions.
Feed direction
streaks are on
stacks of paper
exiting to the bins.
The wiper blade is dirty or
installed incorrectly.
Remove, clean, and reinstall the wiper blade.
See Cleaning the wiper blade or refer to the
instruction sheet in the maintenance kit box.
Symptom Cause Solution