Filter
Top Products
= Supported
X = Not supported
Envelope sizes
Printer models
Size name Literal name Size (mm) Size (inches) Size (points) C540n, C543dn,
C544n/dn/dw
/dtn
X546dtn MFP
otherenvelope Other 296.93 x 427.48 11.69 x 16.83 841 x 842 X X
Literal names supported
= Supported
X = Not Supported
Literal names
Printer models
Literal name Compatible literal name C540n, C543dn, C544n/dn/dw/dtn X546dtn MFP
monarchenvelope 3.875x7.5envelope
com10envelope 4.125x9.5envelope
dlenvelope 110x220envelope
c5envelope 162x229envelope
b5envelope 176x250envelope
PostScript envelope tray support
If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the
envelopetray operators listed in “Envelopetray operator selections” on page 16, then the printer:
• Sets the PageSize Policy to 0.
• Checks the active source to see if it matches the requested envelope size. If the sizes match, the envelope is fed
from the active source.
Note: The active source is the last source selected from the printer control panel or data stream.
• If the requested size and the size loaded in the active source do not match, the sources are searched in the order
defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
• If the requested media size is not found by the previous search, the following search order is used:
– Envelope Feeder
– Multipurpose Feeder
• If the requested size and type are not available from any automatic source, you are prompted to load the requested
envelope size and type in the manual feed source.
• If the size is still not available, a configurationerror is issued and the print job is flushed.
If manualfeed or ManualFeed is true, the printer prompts you to load the requested size manually. If no manual feed
exists on the printer, a rangecheck error message is generated
PostScript (PS) emulation
15