![](http://pdfasset.owneriq.net/d/56/d5645aae-e7d1-483b-9350-5bfc8d428b86/d5645aae-e7d1-483b-9350-5bfc8d428b86-bg12.png)
2 Open both latches on the connector completely.
3 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
4 Align the notches on the memory card with the ridges on the connector.
5 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch
located on either side of the memory card.
1
2
1 Notch
2 Latch
Additional printer setup
18