Filter
Top Products
45
ENG
ENGLISH
CUSTOMIZING SETTINGS
Daisy Chain Monitors
Use this function to share the DVI video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (DVI Cable)
to the DVI OUT connector of product 1 and connect the other end to the DVI IN connector of other
products.
DVI Cable
DVI IN DVI OUT DVI IN DVI OUT DVI IN DVI OUT DVI IN
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
DVI Cable
(Max 3m)
Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
resolution) if the signal is stable and there is no cable loss. If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI booster or
DVI optical cable.
If input signals are received through the HDMI cable, multiple monitors cannot be connected via the
DVI Out port.
NOTE